期刊論文 Journal Papers (SCI) :

  1. Bai, M. R. and Tsai, Y. K., “Optimized energy harvester for moving mass induced vibration,” Smart Mater. Struct. 20 (2011) 055017  (SCI, IF = 1.749)
  2. Mingsian R. Bai and Yao Kun Tsai, 2010, Impact localization combined with haptic feedback for touch panel applications based on the time-reversal approach, J. Acoust. Soc. Am. (SCI, IF = 1.677), Vol. 129(3), pp. 1297-1305 (2011).
  3.  Mingsian R. Bai, Ching-Cheng Chen and Jia-Hong Lin, 2010, On optimal retreat distance for the equivalent source method-based nearfield acoustical holography, J. Acoust. Soc. Am., (accepted).
  4. Mingsian R. Bai, Jia-Hong Lin and Chih-Wen Tseng, 2010, Implementation Issues of the Nearfield Equivalent Source Imaging Microphone Array, J. Sound Vib., 330, 545-558.
  5. Mingsian R. Bai and Yu-Chih Kuo, 2010, Acoustical Design of a Bluetooth Earphone Using Simulated Annealing Optimization, J. Audio Eng. Soc., (SCI, IF=0.527), 58(7/8), 583-589.
  6. Mingsian R. Bai and Chun-Jen Wang, 2010, Experimental modeling and design optimization of push-pull electret loudspeakers, J. Acoust. Soc. Am., (SCI, IF = 1.677), 127(4), 2274-2281.
  7. Mingsian R. Bai, Jia-Hong Lin and Kwan-Liang Liu, 2010, Optimized microphone deployment for near-field acoustic holography: to be, or not to be random, that is the question, J. Sound Vib. (SCI. EI, IF=0.898), 329, 2809-2824.

  8. Mingsian R. Bai and Chih-Chung Lee, 2010, Comparative Study of Design and Implementation Strategies of Automotive Virtual Surround Audio Systems, J. Audio Eng. Soc., (SCI, IF=0.527), 58(3), 141-159.
  9. Mingsian R. Bai, Kur-Nan Hur and Ying-Ting Liu, 2010, Speech Enhancement using an Equivalent Source Inverse Filtering -Based Microphone Array, J. Acoust. Soc. Am., (SCI, IF = 1.677), 127(3), 1373-1380.
  10. Mingsian R. Bai and Jhih-Ren Hong, 2009, Signal processing implementation and comparison of automotive spatial sound rendering strategies, EURASIP Journal on Audio, Speech, and Music Processing, V.2009, 1-16, doi:10.1155/2009/876297.
  11. Mingsian R. Bai, Rong-Liang Chen and Chun-Jen Wang, 2009, Electroacoustic analysis of an electret loudspeaker using combined finite-element and lumped-parameter models, J. Acoust. Soc. Am., (SCI, IF = 1.677), 125(6), 3632-3640 (100th journal paper and 26th JASA paper).
  12. Mingsain R. Bai, Rong-Liang Chen, and Huan-Sheng Zhang, 2009, Designing Low-frequency Enhanced Loudspeaker Systems Using a Vibration-Absorber Theory, J. Audio Eng. Soc., (SCI, IF=0.527), 57(3), 131-148.
  13. Mingsian R. Bai and Chau-Min Huang, 2008, Expert diagnostic system for moving-coil loudspeakers using nonlinear modeling, J. Acoust. Soc. Am., (SCI, IF = 1.677), 125(2), 819-830.
  14.  Mingsian R. Bai, Ping-Ju Hsieh and Ker-Nan Hur, 2008, Optimal design of minimum mean-square error noise reduction algorithms using the simulated annealing technique, J. Acoust. Soc. Am., (SCI, IF=1.677), 125(2), 934-943.
  15. Bai, M. R., Ou, K. Y., and Zeung, P., 2008, Multirate Synthesis of Reverberators Using Subband Filtering, J. Sound Vib., 321, 1090–1108.
  16. Mingsian R. Bai , Jian-Ken Yang, and Ker-Nan Hur, 2008, Design and implementation of a hybrid sub-band acoustic echo canceller (AEC), J. Sound Vib. (SCI.EI, IF=0.898) 321, 1069-1089.
  17. Jian-Da Wu, Mingsian R. Bai, Fu-Cheng Su and Chin-Wei Huang, 2009, An expert system for the diagnosis of faults in rotating machinery using adaptive order-tracking algorithm, Expert Systems with Applications (SCI. EI), 36(3), 5424-5431.
  18. Mingsain R. Bai, Ching-Yu Liu, Rong-Liang Chen, 2008, Optimization of Microspeaker Diaphragm Pattern using Combined Finite Element-Lumped Parameter Models, IEEE Trans. Magnetics, 44(8), 2049-2057.
  19. M. R. Bai and Pochang Ho, 2008, Using a Steered Response Power Phase Transform to Optimize Speech Pickup in Reverberant Environment, J. Audio Eng. Soc., 56(4), 280-291.
  20. J. D. Wu, Y. H. Wang, P. H. Chiang and M. R. Bai, 2009, A Study of Fault Diagnosis in a Scooter Using Adaptive Order Tracking Technique and Neural Network, Expert Systems with Applications, 36(1), 49-56.
  21. M. R. Bai and G. Y. Shih, 2007, Upmixing and Downmixing Two-channel Stereo Audio for Consumer Electronics, IEEE Trans. Consumer Electronics, 53(3), 1011-1019.
  22.  M. R. Bai and J. H. Lin, 2007, Source identification system based on the time-domain nearfield equivalence source imaging: fundamental theory and implementation, J. Sound Vib., 307(1-2), 202-225.
  23. M. R. Bai and K. Y. Ou, 2007, A perceptual approach for interaural transfer function calculation based on Wiener filtering, J. Audio Eng. Soc., (SCI, IF=0.527), 55(9), 752-761.
  24. M. R. Bai, R.L. Chen, and C. Y. Chuang, 2007, Optimal design of resonant piezoelectric buzzer from a perspective of vibration-absorber theory, J. Acoust. Soc. Am., (SCI, IF=1.677),  122(3), 1568-1580.
  25. 23. M. R. Bai and M. C. Chen, 2007, Intelligent Preprocessing and Classification of Audio Signals, J. Audio Eng. Soc., (SCI, IF=0.527), 55(5), 372-384.
  26. 24. M. R. Bai and J. L. Lin, 2007, Integration of a Quantitative Feedback Theory (QFT)-based Active Noise Canceller and 3D Audio Processor to Headsets, ASME/J. Vib. Acoust., (SCI. EI, IF=0.383), 129(5), 567-576.
  27. M. R. Bai and R. L. Chen, 2007,  Optimal Design of Loudspeaker Systems Based on Sequential Quadratic Programming (SQP), J. Audio Eng. Soc., 55(1/2), 44-54.
  28. Mingsian R. Bai, Geng-Yu Shih, and Chih-Chung Lee, 2007, Comparative study of audio spatializers for dual-loudspeaker mobile phones, J. Acoust. Soc. Am., 121(1), 298-309.
  29. J. D. Wu, Y. H. Wang and M. R. Bai, 2007, Development of an Expert System for Fault Diagnosis in Scooter Engine Platform Using Fuzzy-Logic Inference, Expert Systems with Applications (SCI. EI, IF=), 33(4), 1063-1075.
  30. Bai, M. R. and Lin, W. C., 2006, Synthesis and Implementation of Virtual Bass System with the Phase Vocoder Approach, J. Audio Eng. Soc., 54(11), 1077-1091.
  31. Bai, M. R. and Lee, C. C., 2007, Subband Approach to Bandlimited Crosstalk Cancellation System in Spatial Sound Reproduction, EURASIP Journal on Advanced Signal Processing, 2007, 1-9.
  32. Bai, M. R. and Lee, C. C., 2006, Objective and subjective analysis of effects of loudspeaker span on crosstalk cancellation in spatial sound reproduction, J. Acoust. Soc. Am., 120(4), 1976-1989.
  33. Bai, M. R., Ou, K. Y., 2005, Synthesis of Room Responses Using the Virtual Source Representation and the Comb-Nested Allpass Filters, ASME/J. Vib. Acoust., 128(6), 690-698.
  34. Bai, M. R. and Liao, J., 2005, Acoustic Analysis and Design of Miniature Loudspeakers for Mobile Phones, J. Audio Eng. Soc., 53(11), 1061-1076.
  35. Bai, M. R. and Bai, G., 2005, Optimal design and synthesis of reverberators with a fuzzy user interface for spatial audio, J. Audio Eng. Soc., 53(9), 812-825.
  36. Bai, M. R. and Lee, C. C., 2005, Development and Implementation of Cross-Talk Cancellation System in Spatial Audio Reproduction Based on the Subband Filtering, J. Sound Vib., 290(3-5), 1269-1289.
  37. Bai, M. R., Tung, C, W., and Lee, C. C., 2005, Optimal design of loudspeaker arrays for robust cross-talk cancellation using the Taguchi method and the genetic algorithm, J. Acoust. Soc. Am., 117(5), 2802-2813.
  38. Bai, M. R. and Ou, K. Y., 2005, Synthesis of Room Responses Using Virtual Source Representation with Application in Reverberator Design, J. Audio Eng. Soc., 53(4), 297-306.
  39. Bai, M. R. and Lin, C, 2004, Microphone array signal processing with application in three-dimensional spatial hearing, J. Acoust. Soc. Am., 117(4), 2122-2133.
  40. Bai, M. R. and Tsao, T. C., 2006, Numerical modeling of head related transfer functions using the boundary source representation, ASME/J. Vib. Acoust., 128(5), 594 - 603.
  41. Bai, M. R. and Huang, S. 2004, The system-on-chip design of a silicon micromachined condenser microphone array, J. Acoust. Soc. Am.,116(1), 303-312.
  42. Bai, M. R. and Zeung, P., 2004, Fast convolution technique using a non-uniform sampling scheme: the algorithm and the applications in audio signal processing, J. Audio Eng. Soc.,52(5),496-505.
  43. Bai, M. R. and Kuo, J., 2004, Optimal design and implementation of an omni-directional panel speaker array using the genetic algorithm, ASME/J. Vib. Acoust., 126(4), 553-560.
  44. Bai, M. R. and Ou, K. Y., 2005, Head-Related Transfer Function (HRTF) Synthesis Based on a Three Dimensional Array Model and Singular Value Decomposition, J. Sound Vib., 281(3-5), 1093-1115.
  45. Bai, M. R. and Lu, Y, 2004, Optimal implementation of miniature piezoelectric panel speakers using the Taguchi method and genetic algorithm. ASME/J. Vib. Acoust.,126(3), 359–369.
  46. Bai, M. R., J. M. Huang, M. H. Hong and F. C. Su, 2005, Fault Diagnosis of Rotating Machinery Using an Intelligent Order Tracking System, J. Sound Vib., 280 (3-5), 699-718.
  47. Bai, M. R. and Huang, C., 2003, Optimization and implementation of piezoelectric radiators using the genetic algorithm, J. Acoust. Soc. Am., 113(6), 3197-3208.
  48. Bai, M. R. and Elliott, S. J., 2004, Preconditioning Multichannel Adaptive Filtering Algorithms using EVD and SVD-based Signal Prewhitening and System Decoupling, J. Sound Vib., 270(5), 639-655.
  49. Bai, M. R. and Liu, B., 2002, Determination of Optimal Exciter Deployment for Panel Speakers Using the Genetic Algorithm, J. Sound Vib., 269, 727-743.
  50. 54. Bai, M. R. and Zeung, P., 2004, Design of a Broadband Active Silencer Using the u-Synthesis, J. Sound Vib., (SCI. EI, IF=0.898), 269, 113-133.
  51. 55. Bai, M. R., Jeng, J., and Chen, C., 2002, Adaptive Order Tracking Technique using Recursive Kalman Filtering, JVA/ASME, (SCI.EI, IF=0.383), 126, 56-62. SCI RE-89004.
  52. Bai, M. R. and Lai J., 2003, Broadband Spatially Feedforward Active Noise Control Algorithms Using a Comb Filter, JVA/ASME, 125, 18-23. NSC 89-2212-E-009-007
  53. Bai, M. R. and Chung, K., 2002, Optimal Design of Panel Speaker Array with Omni-directional Characteristics, J. Acoust. Soc. Am., 112(3), 876-883. NSC 91-2212-E-009-032
  54. Bai, M. R., Jeng, J. and Chen, C., 2002, Adaptive Order Tracking Technique using Recursive Least-Square Algorithm, JVA/ASME,124,502-511. SCI RE-89004
  55. Bai, M. R. and Tsao, M., 2002, Estimation of sound power of baffled planar sources using radiation matrices, J. Acoust. Soc. Am., 112(3), 876-883.SCI 89-2212-E009-057
  56. Bai, M. R. and Liu, W, 2002, Control Design of Active Vibration Isolation Using u-Synthesis, J. Sound Vib., vol. 257(1),157-175. SCI892212E009 007
  57. Bai, M. R., Lin, Y., and Lai, J., 2002, Reduction of electronic delay in active noise control systems -- a multirate signal processing approach, J. Acoust. Soc. Am. 111(2), 916-924.SCI 892212E009 007
  58. Bai, M. R. and Ou, K. Y., 2002, DSP Implementation of Adaptive Predictive Control of Rotor Vibrations, IEEE, Control Systems and Technologies, 10(6), 895-901.89-2212-E009-007
  59. Bai, M. R. and Zeung, P., 2002, Synthesis of a Robust Broadband Duct ANC System Using Convex Programming Approach, J. Acoust. Soc. Am.,114(4),1751-1757.SCI872212E009 022
  60. Bai, M. R. and Huang, T, 2001, Development of Panel Loudspeaker System: Design, Evaluation and Enhancement, J. Acoust. Soc. Am., 109(6), 2751-2761. SCI892212E009 057
  61. Bai, M. R. and Lin, Y. J., 2001, Analysis and DSP Implementation of a Broadband Duct ANC System Using Spatially Feedforward Structure, ASME/ J. Vib. Acoust., 123(2), 129-136.872212E009 022
  62. Bai, M. R. and Zeung, P., 2001, Implementation of a Broadband Duct ANC System Using Adaptive Spatially Feedforward Structure, J. Sound Vib., 251(5), 891-903. 872212E009 022
  63. Wu, J. D. and Bai, M. R., 2001, Application of Feedforward Adaptive Active Noise Control for Reducing Blade Passing Noise in Centrifugal Fans, J. Sound Vib., 239, 1051-1062. SCI
  64. Bai, M. R. and Chen, H. H., 2000, Active Cancellation of Noise in a Car Cabin Using the Zero Spillover Controller, J. Sound Vib., 235( 5), 787-800. SCI,
  65. Bai, M. R., Hsiao, I. L., Tsai, H. M., and Lin, C. T., 2000, Development of an On-line Diagnosis System for Rotor Vibration via Model-based Intelligent Inference, J. Acoust. Soc.Am., 107(1), 315-323.
  66. Bai, M. R. and Luo, W., 2000, DSP Implementation of an Active Bearing Mount for Rotors Using Hybrid Control, ASME, J. Vib. Acoust., 122, 420-428.SCI892212E009 007
  67. Bai, M. R. and Wu, H. P., 1999, Robust Design of a Sensorless Bass-enhanced Moving-coil Loudspeaker System, J. Aoust. Soc. Am. 105( 6), 3283-3289.872212E009022
  68. Bai, M. R. and Lin, H. H., 1998, Plant Uncertainty Analysis in a Duct ANC Problem by Using the Hinf Theory, J. Acoust. Soc. Am. 104(1), 237-247.SCI830401E009024
  69. Bai, M. R. and Lin, Z. H., 1998, Active Noise Cancellation for a Three-Dimensional Enclosure by Using Multiple-channel Adaptive Control and Hinf Control, ASME, J. Vib. Acoust., 120, 958-964.
  70. Bai, M. R., Lin, H. H., and Lin, Z. H., 1998, Development and Implementation of a Semi-adaptive Hinf Active Control Algorithm for Duct Noise, ASME, J. Vib. Acoust., 121, 123-125.862212E009003
  71. Bai, M. R. and Lee, J. W., 1998, Industrial Noise Identification by Using an Acoustic Beamforming System, ASME, J. Vibration and Acoustics, 120, 426-433.830401E009 024
  72. Bai, M. R. and Wu, T. Y., 1998, Simulation of an Internal Model-Based Active Noise Control System for Suppressing Periodic Disturbances, ASME, J. Vib. Acoust., 120, 111-116.830401E009024
  73. Bai, M. R. and Chen, H. P., 1997, Development of a Feedforward Active Noise Control System by using hte H2 and Hinf Model Matching Principle, J. Sound Vib., 201(2), 189-204.SCI830401E009024
  74. Bai, M. R. and Lee, D. J., 1997, Implementation of an Active Headset by Using the Hinf Robust Control Theory, J. Acoust. Soc. Am. , 102(4), 2184-2190.840401E009 024
  75. Bai, M. R. and Lin, H. H., 1997, Comparison of Active Noise Control Structures in the Presence of Acoustical Feedback by using the Hinf Synthesis Technique, J. Sound Vib, 206(4),453-471.830401E009024
  76. Bai, M. R. and Wu, T. Y., 1997, Study on Acoustic Feedback Problem of Active Noise Control by Using L1 and L2 Vector Space Optimization Approaches, J. Acoust. Soc. Am., 102(2), 1004-1012.830401E009 024
  77. Bai, M. R. and Chen, H. P., 1996, The Modified H2 Feedforward Active Control System for Suppressing Broadband Random and Transient Noises, J. Sound and Vibration, 198(1), 81-94. 830401E009 024
  78. Bai, M. R. and Lin, G. M., 1996, Development of a DSP-Based Active Small-Amplitude Vibration Control System for Flexible Beams by using the LQG Algorithms and Intelligent Materials, J. Sound and Vibration, 198(4), 411-427. 830401E009 024
  79. Bai, M. R., 1995, Acoustical Source Characterization by using Recursive Wiener Filtering, J. Acoust. Soc. Am., 97(5), 2657-2663. 830401E009 571
  80. Bai, M. R. and Lin, Y. Y., 1995, Experimental Characterization of the Vibrational Behavior of a Fluid-filled Thin Shell for the Purpose of Response Estimation, J. Acoust. Soc. Am., 98(6), 3320-3325.810401E009 571
  81. Bai, M. R. and Shieh, C. F., 1995, Active Noise Cancellation by using the Linear Quadratic Gaussian Independent Modal Space Control, J. Acoust. Soc. Am., 97(5), 2664-2674. 830401E009 024
  82. Bai, M. R. and Wu, K. R., 1994, Free Vibration of a Thin Spherical Shell Containing a Compressible Fluid, J. Acoust. Soc. Am., 95(6), 3300-3310. 810401E009 13
  83. Bai, M. R., 1992, Study of Acoustic Resonance in Enclosures Using Eigenanalysis Based on Boundary Element Methods, J. Acoust. Soc. Am. ,91(5), 2529-2538. 800401E009 13
  84. Bai, M. R., 1992, Application of BEM (Boundary Element Method)-Based Acoustic Holography to Radiation Analysis of Sound Sources with Arbitrarily Shaped Geometries, J. Acoust. Soc. Am., (SCI, IF = 1.677, Cited number = 124 on 7/26/2010 by Google Scholar), 92(1), 533-549.790401E009 16.

 

Non-SCI :

  1. 白明憲、廖國志,2011 微機電電容式麥克風之靜態和動態的行為分析與其在陣列上的應用,電子月刊20111月號,1-17
  2. Mingsian R. Bai and Yao Kun Tsai, 2010, Optimizing Piezoelectric Panel Speakers Using the Simulated Annealing Algorithm, J. Mechanical Engineering Science, Volume 225, Number 3/2011, 548-557.
  3. Mingsain R. Bai and and Huiwen Chen, 2009, Comparative Study of Optimal Design Strategies of Reverberators, Open Acoustics Journal, 2, 31-34.
  4. Mingsian R. Bai and J. H. Lin, 2009, Sound field visualization using microphone array and Labview/PXI system, Mechatronics Magazine, 125, 87-96.
  5.  Intelligent Classification Techniques, The Open Acoustics Journal, 1, 1-14, http://bentham.org/open/toacoj/openaccess2.htm, doi: 10.2174/1874837600801010001.
  6. M. R. Bai, W. Tseng , G. Y. Shih , and J. R. Hong, 2007, Comparative Study of Audio Downmixing and Up/Downmixing Algorithms for Spatial Audio Reproduction over Loudspeakers, GESTS Int. Trans. Communication and Signal Processing, 10(10).
  7. 白明憲, 2006, 壓電平面喇叭之最佳設計與實作, 國科會工程科技通訊, 88, 24-26.
  8. Bai, M. R. and Huang, C.,  2006, Head-Related Transfer Function Synthesis Based on Field Interpolation and Model Reduction, CSME, 27(3), 371-382.
  9. Chang, J. R., Cheng, H. K., Lee, S. Y., Bai, M. R. and Lean, R. I., 2003, A novel earplug system for filtering out dental noise, J. Marine Science and Technology, 11(4), 179-188.
  10. Bai, M. R. and Zeung, P., 2004, Fast convolution technique using a non-uniform sampling scheme: the algorithm and the
  11. Wu, J. D. and Bai, M. R., 2003, A Ring Silencer Design for Reducing Noise of Axial Fan, Fluctuation and Noise Letters, 3(3), 259-264.
  12. Wu, J. D., Lee, T. H. and Bai, M. R., 2003, Background Noise Cancellation for Hands-Free Communication Systems of Car Cabins Using Adaptive Feedforward Algorithms, International Journal of Vehicle Design, 31(4), 440-451.
  13. Bai, M. R. and Chung, K. 2002, DSP Implementation of Beam Steered Panel Speaker Arrays, CSME, 24(1), 49-58.
  14. Bai, M. R. and Ou, K. Y., 2002, Design and Implementation of Electro-magnetic Active Control Actuators, J. Vibration and Control, 9(8), 997-1017. NSC 89-2212-E009-007
  15. 白明憲,黃大隆, 2001, 平面喇叭的設計與評估, 工業材料, 177, 101-109.
  16. Chen, H., Wu, J. D. and Bai, M. R., 2001, Development of a Multiple Channel Active Noise Cancellation System for Car Cabins, Int. J. Vehicle Design, 33(4), 422-439. 872212E009 022
  17. Wu, J. D. and Bai, M. R., 2001, Development of a Zero Spillover Controller for Broadband Cancellation of Noise in Ducts, Japanese Journal of Applied Physics, 40, 6634-6640.
  18. Wu, J. D. and Bai, M. R., 2001, Effects of Directional Microphone and Transducer in Spatially Feedforward Active Noise Control System, Japanese Journal of Applied Physics, 40 (Pt. I, N.10), 6133-6137.
  19. Wu, J. D. and Bai, M. R., 2000, Digital Signal Processor Implementation of Active Noise Control Systems for Broadband Noise Cancellation in Engine Exhaust Systems, Japanese Journal of Applied Physics, V. 39, 4982-4986.SCI
  20. Hsiao, I. L., Kuo, C. H., Bai, M. R. and Lin, C. T., 1999, On-line Fault Diagnosis of Rotor Vibration by using Signal-based Feature Generation and Neural Fuzzy Inference, J. Chinese Soc. Mech. Engr., 20(4), pp. 345-352.
  21. Bai, M. R. and Lee, D. J., 1997, Investigation of Active Noise Control Structures for Ducts by Using the Hinf Robust Control Theory, J. Chinese Soc. Mech. Engr., 18(5), 395-405.SCI,E830401E009 024
  22. Bai, M. R. and Lin, Z. H., 1997, Development of an Adaptive H2 and Hinf Active Electronic Muffler, J. Chinese Society of Mechanical Engineers, 18(4), 341-348.830401E009 024
  23. Bai, M. R. and Chang, S. S., 1996, Noise Control of Harmonic Fields by Using BEM-Based Optimization Techniques, J. Chinese Society of Mechanical Engineers, 17(1), 35-49.810401E009 571
  24. Bai, M. R. and Chang, S. S., 1996, Active Noise Control of Enclosed Harmonic Fields by Using BEM-Based Optimization Techniques, Applied Acoustics, 48(1), 15-32.810401E009 571
  25. Bai, M. R., Chang, C. Y., and Chen, R., 1995, Passive and Active Control for Noises in Ducts: Experimental Investigations, J. Chinese Society of Mechanical Engineers, 16(2), 155-166.
  26. Bai, M. R. and Chang, C. Y., 1994, Active Control for Noises in Ducts using a DSP-based Electronic Silencer, 勞工安全衛生研究季刊, V.2, No.4, 25-36.
  27. Bai, M. R. and Lu, M. C., 1994, Prediction of Acoustically Induced Surface Vibration and Exterior Radiation of a Cylindrical Shell, J. Chinese Society of Mechanical Engineers, 15(4), 353-362. 810401E009 571
  28. Bai, M. R., 1992, Spatial Transformation Techniques for Sound Fields Radiated by Arbitrarily Shaped Sources, J. Chinese Society of Mechanical Engineers, 13(2), 145-160. 790401E009 16

 

« Return »